|
In addition to our new items, we also offer a complete line of chair seat restoration services. Do you have an existing piece that you would like to get repaired? Look no further. We can
CANE,
RUSH,
SPLINT, or
SHAKER TAPE
your existing chair and restore it to its’ original utility. If you are not real sure as to what your chair might need, we suggest you use the buttons below. They will show you examples of caning, rushing, splinting, and shaker tape and, hopefully, give you a better idea of both what you need and the approximate costs involved.
Our pricing is determined according to the work that needs to be done:
- BASIC HAND CANING is $1.75 per hole (counting the number of holes drilled in the frame).
- BLIND or "FRENCH" CANING is charged on a per piece basis as we need to see the item before giving an estimate.
- PRESS CANE costs $7.00 per inch, as measured on the longest edge of the area to be done. This is usually across the front of a seat or from top to bottom on a back. There may be an extra charge for curved backs.
- RUSH costs $7.00 per inch, as measured on the longest edge of the area to be done, usually across the front of the seat. Windsor chairs and Hitchcock chairs may cost extra.
- SPLINT costs $7.00 per inch, as measured on the longest edge of the area to be done. This is usually across the front of a seat or from top to bottom for a back.
- SHAKER TAPE costs $7.00 per inch, as measured on the longest edge of the area to be done. This is usually across the front of a seat or from top to bottom for a back.
As always, the best way to determine the work needed and its’ cost, is to bring the piece to our shop.
Since we work closely with several furniture repair and restoration shops in the area, we can offer you the convenience of "one stop shopping". Bring your chair or stool to us, and we will coordinate with a restoration or refinishing shop to restore your piece to the condition you want.
|
|
